Primers, undercoats and topcoats do different jobs. Skipping a step is the most common reason a finish fails early.
A paint system is a stack. Each layer has a job, and the topcoat only performs if the layers beneath it are doing theirs.
Primer
Primer bonds to the substrate and blocks suction. New plaster, bare timber and repaired patches all need it, and stain-blocking primers stop water marks from bleeding through.
Undercoat
Undercoat builds film and gives the topcoat an even base. On trim it is what makes the final coat look flat rather than patchy.
Topcoat
This is the coat you see and clean. Two thin coats always beat one thick one, and drying time between them is not optional.
Where systems differ
- Bathrooms need a mould-resistant system
- Exteriors need flexibility and UV stability
- Metal needs a suitable primer and enamel
- Older plaster prefers breathable coatings
We list the system for each service page so you know exactly what is being applied and why.