Preparation is most of the work. Filling, sanding and dust control decide whether a finish reads smooth in raking light.
Raking light from a window shows every ridge. Preparation is the stage that decides whether your wall reads smooth, and it is the stage most DIY repaints skip.
Clean first, always
Grease and dust stop paint bonding. Sugar soap, a rinse and a full dry are non-negotiable in kitchens and above radiators.
Fill, then sand
Filler shrinks as it cures, so we fill twice on deeper holes and sand with a flat block rather than fingers to keep the surface true.
Control the dust
Sheeting, taped edges and a vacuum at the sander keep dust out of the rest of the house. This is why a prepared room stays liveable.
Before the first coat
- All patches dry and sanded flush
- Edges taped and floors sheeted
- Primer applied to bare areas
- Fittings removed rather than painted around
Only then does the finish coat make sense.